UES HP 07 manualy operated hot melt gun

The HP07 is prepared for the manual application of hot melt adhesive or other thermoplastic materials. It is available in 3 versions; standard bead, zero cavity bead and swirl/spray. The supply of hot melt exclusively takes part via a flexible hose (max. ø of the cap at the end of the hose 44 mm), which is separately connected to the handgun. The advantage of a system like this; is that the hose can be easily and quickly replaced in case of a break down or in case a longer or shorter hose is preferred in the production proces. A heater cartridge and a temperature sensor (Ni 120, PT100, NTC etc.) regulate the temperature of the handgun independent of the hose and the tank temperature. The HP07 is equipped with a micro switch, with which a gear pump, a bulk melter or an air heater (HP07SP) can be controlled.

from left to right; HP-07 zero cavity, HP-07 Swirl and HP-07 Standard bead